Shingle Repair in Bellevue, WA

Your written quote covers the repair work itself — the matching shingles, the flashing, the underlayment in the repair spot and the clean-up — plus the free inspection and the photos we take. If the inspection finds hidden damage, such as soft decking, we show you the photos and explain it before you agree to anything. No work begins without your agreement.

We do not publish a fixed minimum charge. A small repair involving a few shingles typically costs about $100 to $700, while a repair involving several damaged areas or a larger roof section typically runs $300 to $800. You get an exact price in writing after the inspection, so a small job is priced on what it actually needs.

We walk the roof and check the shingles, flashing, valleys and vents, look in the attic where possible, and take photos of every problem spot. You get a written assessment showing what needs repair now and what can wait, with the exact price in writing. The inspection itself is free, and no work begins without your agreement.

Neither is better for every roof — it depends on what is already on your home. Architectural (laminate) shingles are thicker and heavier, while 3-tab shingles are flatter and lighter, and both are common across Bellevue. We repair both types and match the profile already on your roof, so the repair blends in. An inspection tells you which type you have.

We have 27 years of experience repairing shingle roofs, and we are a GAF Master Elite Contractor, an Owens Corning Preferred and Platinum Preferred Contractor, a CertainTeed ShingleMaster and Select ShingleMaster, a Malarkey Emerald Pro and a member of the Roofing Contractors Association of Washington (RCAW). We are based at 1022 110th Ave SE, Bellevue, WA 98004.

Not while the roof is wet. We do not climb a wet, icy or storm-damaged roof, because it is unsafe and the repair will not hold. If your roof is leaking, call (425) 738-3670 — an active leak gets priority, and we can advise on a temporary cover while we wait for dry weather. We book the repair for the next safe, dry slot.

Call (425) 738-3670 first — an active leak gets priority. Move valuables away from the drip, photograph the damage and any interior stains, and note when the leak appears. Do not climb on the roof. We inspect the roof, take photos, and give you a written quote before any work starts, so you can see exactly what needs fixing.

Yes. Steep roofs take longer and need more safety equipment, so the same repair costs more than on a low-slope roof and sits toward the high end of the range. Hard access, such as a roof over a conservatory or a narrow side passage, has the same effect. We confirm the exact price in writing after a free inspection, before any work starts.

Yes. Moss holds water against shingles, lifts the edges and speeds up wear, especially on shaded and north-facing slopes in Bellevue. We check for moss on every inspection and tell you whether the damaged shingles need replacing. Never pressure wash a shingle roof — a low-pressure soft wash kills moss and algae at the root.

Most small shingle repairs in Bellevue do not need a building permit. The City of Bellevue says no permit is required for a residential roof replacement when the repaired or replaced sheathing is limited to five 4-by-8-foot sheets, and a roof recover needs no permit unless it adds more than 5% to the roof's weight. Building and energy code rules still apply. We tell you before work starts if your job needs a permit.